Decal requirements for lightweight construction

Summary#

Bill 25, the Rea and Walter Act (Truss and Lightweight Construction Identification), 2018, would amend Ontario’s Building Code Act, 1992 and Fire Protection and Prevention Act, 1997. Its stated goal is to identify certain buildings that use truss and lightweight construction. The bill says it would start one year after receiving Royal Assent.

  • For buildings under construction or to be built, it would require an identification decal on commercial or industrial buildings and multi-family dwellings with at least three units, other than townhouses, if they use this construction.
  • For buildings covered by the Fire Protection and Prevention Act, it would require the same kind of decal. The requirement would generally not apply to unoccupied parts of buildings under construction, with exceptions for long pauses in work or unsafe conditions affecting occupied parts.
  • The decal would be round, reflective, 145 mm wide, with a white background and red border. It would show “F” for floors, “R” for roofs, or “FR” for both.
  • Regulations could set the decal’s location and who must put it up. The bill itself does not name those people or locations.

What it means for you#

  • Building owners and people responsible for construction: If regulations require you to affix decals, you would have to follow the specified rules. The bill does not itself say who is responsible.
  • People who respond to fires: The decals are intended to identify certain structural features. It is an inference that this could help responders recognize those features; the bill does not require any particular response or training.
  • Residents and the general public: The bill does not directly change housing eligibility, rents, building ownership, or fire services.
  • Buildings under construction: Under the Fire Protection and Prevention Act, the decal rule would generally exclude unoccupied parts. It would apply to those parts if construction-related work had stopped for at least six months, or conditions there threatened the safety of occupied parts.

Money#

No cost information is in the available material.

  • The bill could create costs for decals and for whoever regulations require to affix them. The bill does not identify who would pay or estimate the amount.
  • It allows regulations about who must affix decals, but does not itself set out staffing, enforcement costs, fees, fines, or penalties.

What is unclear#

  • The Building Code Act, 1992 and Fire Protection and Prevention Act, 1997 were not supplied, so the bill’s changes cannot be checked against all current requirements or existing rules.
  • Regulations would determine who affixes decals and where they go. Those details are not in the bill.
  • The bill does not set out an inspection or enforcement process, deadlines for existing buildings, or how non-compliance would be handled.
  • No publicly available information is supplied about the regulations, their timing, or whether the bill received Royal Assent.

Case for#

  • A clear exterior marker could make it easier to identify certain structural features without opening the building.
  • The “F,” “R,” and “FR” labels distinguish whether the identified construction is in the floor, roof, or both.
  • Applying the rule to both new construction and buildings covered by the Fire Protection and Prevention Act could address identification beyond the construction stage.

Case against#

  • The bill leaves key practical details—including who must install decals and where—to future regulations.
  • It does not specify inspections, enforcement, penalties, or how existing buildings would be brought into compliance.
  • The bill does not estimate the cost or say who would pay, so the burden on building owners or others is unclear.