Bill Would Require Building Safety Decals

Summary#

Bill 105, the Rea and Walter Act (Truss and Lightweight Construction Identification), 2017, would amend Ontario’s Building Code Act, 1992 and Fire Protection and Prevention Act, 1997. Its stated goal is to identify certain buildings that use truss and lightweight construction; it does not ban that construction or require replacing it.

  • For qualifying commercial or industrial buildings and multi-family dwellings with three or more units (except townhouses), it would require a reflective decal showing whether the floor, roof, or both use the specified construction.
  • Under the Building Code Act, the rule would cover qualifying buildings under construction or to be built. Under the Fire Protection and Prevention Act, it would cover existing qualifying buildings.
  • The decal would have to be round, 145 mm wide, with a white background and red border. It would show “F” for floor construction, “R” for roof construction, or “FR” for both.
  • Regulations could set the decal’s location, name who must put it up, add other rules, and address transition arrangements. The bill does not create a new agency.
  • The Act would start one year after Royal Assent.

What it means for you#

  • Owners and people responsible for qualifying buildings: The buildings would have to display the required decal. The bill does not itself say who must affix it; regulations could specify that.
  • Builders and building operators: The requirement would apply to the listed types of construction and buildings, not to every building. The bill does not require structural changes or prohibit truss and lightweight construction.
  • People responding to emergencies: The decal could provide information about the floor or roof construction. The bill does not set rules for how that information must be used.
  • People in buildings under construction: Under the fire-safety law amendment, unoccupied parts of a building under construction would generally be exempt. The exemption would not apply if construction work had stopped for at least six months, or conditions in the unoccupied parts threatened the safety of occupied parts.

Money#

No cost information is in the available material.

  • The bill requires decals but gives no estimate of their cost or who would pay for them.
  • It would allow regulations to name the people responsible for affixing decals. The bill gives no estimate of any related staffing, enforcement, or public costs.

What is unclear#

  • The bill leaves the decal’s location and the responsible person to regulations; no regulations are supplied.
  • It does not set out an application or inspection process, deadlines for individual buildings, or how compliance would be checked.
  • The bill does not specify a penalty for failing to display a decal.
  • The definition of “truss and lightweight construction” is supplied, but terms such as “commercial or industrial purposes” are not defined in the bill.
  • The parent Acts were not supplied, so existing identification rules and how these amendments would interact with current law could not be verified.

Case for#

  • The bill appears intended to make certain structural features easier to identify in qualifying buildings.
  • A standard decal that distinguishes floors, roofs, or both could give people information about a building’s construction.
  • Applying the rule to both buildings being built and existing buildings could extend identification beyond new construction.

Case against#

  • The bill sets the decal’s design but leaves important practical rules—including its location and who must put it up—to later regulations.
  • Without a stated compliance process, penalty, or cost estimate, it is unclear how the requirement would be carried out and what it would cost building owners or government.
  • The bill does not explain how the information would be used or how it would reach people who may need it.