Lighting controls for street lighting fixtures

Summary#

Introduction 0815-2026, sponsored by Council Member Harvey D. Epstein, would amend the New York City Administrative Code. Its stated goal, reflected in the required study, is to assess whether shielded streetlights with adaptive lighting controls should be used citywide. The bill is waiting in committee and is not law.

  • When the Department of Transportation (DOT) installs or replaces a streetlight on a residential street, it must use a shielded fixture with a motion sensor that automatically dims the light at times and to levels DOT sets.
  • DOT may make an exception if, in its professional engineering judgment, the required fixture would create unsafe conditions or be impracticable.
  • DOT must study possible citywide use of shielded fixtures with adaptive controls. The study must assess current lighting and traffic, survey available controls, make recommendations and identify limitations, and determine whether citywide use is appropriate.
  • DOT must report annually on residential-street installations and study progress, starting by June 1, 2027. The study report is due by June 1, 2028. The study and reporting requirements expire when DOT submits that report.

What it means for you#

  • People using residential streets: New or replacement streetlights would have to be shielded and motion-sensor-controlled, unless DOT makes one of the stated exceptions. The bill does not require changes to existing fixtures that are not being replaced.
  • Residents and other street users: “Residential streets” means streets or parts of streets in a residential zoning district. The bill does not guarantee that lights will be dimmed at particular times or to particular levels; DOT would set those.
  • DOT: The department would have to install the specified fixtures when the rule applies, conduct the study, and submit and publish the required reports.
  • The bill does not require citywide installation of adaptive lighting controls. It requires DOT to study whether such use is appropriate.

Money#

No cost information is in the available material.

  • The bill would require DOT to install qualifying fixtures and carry out the study and reports, but gives no cost estimate or staffing details.
  • It does not set a fee, fine, or funding amount.

What is unclear#

  • The bill does not set the dimming times or lighting levels; DOT would determine them.
  • It gives no criteria for deciding when installation is “impracticable,” beyond DOT’s professional engineering judgment.
  • It does not describe a process for public input, review of DOT’s exceptions, or oversight of the study.
  • It does not say how much the required fixtures, study, or reporting would cost.

Case for#

  • A possible argument for the bill is that shielded, sensor-controlled lights could allow DOT to adjust street lighting while still requiring lighting on residential streets when fixtures are installed or replaced.
  • The required study could give the city information about current lighting, traffic, available controls, and limits before deciding whether citywide use is appropriate.
  • The safety and impracticability exceptions let DOT avoid installations that its engineering judgment finds unsuitable.

Case against#

  • One concern is that DOT would set the dimming times and levels, while the bill gives few rules for those decisions.
  • The safety and impracticability exceptions leave substantial judgment to DOT, and the bill does not set a review process for those decisions.
  • The bill requires installations, a study, and reports but gives no cost estimate or funding plan.